Brother MFC-9330CDW Network User's Guide

Control panel setup
47
4
Reset the network settings to the factory default 4
You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
NOTE
• This function resets all wired and wireless network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management. (For more information, see Other Management Utilities on page 8.)
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Network.
Press Network.
d Swipe up or down, or press a or b to display Network Reset.
Press Network Reset.
e Press Yes.
f Press Yes for 2 seconds to confirm.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes