Brother MFC-9330CDW Network User's Guide

Web Based Management
69
5
d Click Scan to FTP/Network Profile on the Scan page.
Now you can configure and change the following Scan to FTP settings using a web browser:
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 Glass Scan Size
 File Size
 Remove Background Color
 Passive Mode
 Port Number
You can set Passive Mode to Off or On depending on your FTP server and network firewall
configuration. By default, this setting is On. You can also change the port number used to access the
FTP server. The default for this setting is port 21. In most cases these two settings can remain set as
default.
NOTE
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
e Click Submit.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes