Options
103
B
e Hold the DIMM by the edges and align
the notches in the DIMM with the
protrusions in the slot. Insert the DIMM
diagonally (1), then tilt it toward the
interface board until it clicks into
place (2).
f Put the DIMM covers (2 and 1) back on.
g Plug the machine’s power cord back into
the electrical socket first, and then
connect the interface cable.
h Plug in the telephone line cord. Turn on
the machine’s power switch.
Note
To make sure that you have installed the
SO-DIMM properly, you can print the User
Settings List that shows the current
memory size.
(See Reports on page 68.)
1
2
2
1
To Next Page
Loading...
