Brother MFC-9450CDN - 3 General Setup; Paper Settings; Paper Type

20
3
Mode timer 3
The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
a Press Menu, 1, 1
General Setup
1.Mode Timer
b Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c Press Stop/Exit.
Paper settings 3
Paper type 3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a Do one of the following:
 To set the paper type for the
MP Tray press Menu, 1, 2, 1.
 To set the paper type for Tray#1
press Menu, 1, 2, 2.
 To set the paper type for Tray#2
press Menu, 1, 2, 3 if you installed
the optional tray.
Paper Type
1.MP Tray
b For Tray#1 and Tray#2 press a or b to
choose Thin, Plain or
Recycled Paper. For MP Tray
press a or b to choose Thin, Plain,
Thick, Thicker or
Recycled Paper.
Press OK.
c Press Stop/Exit.
General setup 3