Chapter 5
32
Cancelling a broadcast in
progress 5
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a Press Menu, 2, 6.
The LCD will display the fax number
being dialled (for example,
#001 0123456789) and the broadcast
job number (for example,
Broadcast#001):
Remaining Jobs
#001 0123456789
b Press a or b to choose the job you want
to cancel.
Press OK.
#001 0123456789
1.Clear 2.Exit
c Press 1 to clear the fax number or 2 to
exit.
If you chose to only cancel the fax
currently being sent in b, the machine
will ask you if you want to cancel the
broadcast. Press 1 to clear the whole
broadcast job or 2 to exit.
Broadcast#001
1.Clear 2.Exit
d Press Stop/Exit.
Additional sending
operations 5
Sending faxes using multiple
settings 5
Before you send a fax, you can change any
combination of these settings: contrast,
resolution, overseas mode, delayed fax timer,
polling transmission, real time transmission
or cover page settings.
a Make sure you are in Fax mode .
After each setting is accepted, the LCD
asks if you want to enter more settings:
Next
1.Yes 2.No
b Do one of the following:
To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
If you have finished choosing
settings, press 2 and go to the next
step for sending your fax.
To Next Page
Loading...
