Brother MFC-9450CDN - Enlarging or reducing the image copied

Making copies
71
12
Copy options
(temporary settings)
12
When you want to quickly change the copy
settings temporarily for the next copy, use the
temporary Copy keys. You can use different
combinations.
The machine returns to its default settings
after 60 seconds or if the Mode Timer returns
the machine to Fax mode. (See Mode timer
on page 20.)
Enlarging or reducing the
image copied 12
You can choose the following enlargement or
reduction ratios:
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instructions below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Enlarge/Reduce.
e Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose
Custom(25-400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
53 to enter 53%.)
Press OK.
f Press Mono Start or Colour Start.
Note
Page Layout Options 2in1(P),
2in1(L), 4in1(P) or
4in1(L) are not available with
Enlarge/Reduce.
Press 100%*
104% EXEiLTR
141% A5iA4
200%
Custom(25-400%)
50%
70% A4iA5
78% LGLiLTR
83% LGLiA4
85% LTRiEXE
91%FullPage
94% A4iLTR
97% LTRiA4