Brother MFC-9450CDN - Volume Settings; Ring Volume; Beeper Volume; Speaker Volume

General setup
23
3
Volume settings 3
Ring volume 3
You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press or to adjust
the volume level. The LCD shows the current
setting, and each key press will change the
volume to the next level. The machine will
keep the new setting until you change it.
You can also change the ring volume through
the menu:
a Press Menu, 1, 4, 1.
Volume
1.Ring
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.
Beeper volume 3
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a Press Menu, 1, 4, 2.
Volume
2.Beeper
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.
Speaker volume 3
You can choose a range of speaker volume
levels, from High to Off.
You can change the speaker volume through
the menu:
a Press Menu, 1, 4, 3.
Volume
3.Speaker
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.