Receiving a fax
41
6
Receive mode settings 6
Ring delay 6
The ring delay sets the number of times the
machine rings before it answers in Fax Only
and Fax/Tel modes.
If you have external or extension telephones
on the same line as the machine or subscribe
to the BT Call Sign
1
service, keep the
maximum number of rings. (See Operation
from extension telephones on page 47 and
Fax Detect on page 41.)
1
BT Call Sign is for U.K. only.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 1.
Setup Receive
1.Ring Delay
c Press a or bor to choose how many
times the line rings before the machine
answers.
Press OK.
d Press Stop/Exit.
F/T ring time 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T ring time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. (For more information see
Using remote codes on page 49.)
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 2.
Setup Receive
2.F/T Ring Time
c Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.
d Press Stop/Exit.
Fax Detect 6
Turning fax detect On allows the machine to
receive fax calls automatically if you lift any
handset on the same line as the machine.
When you see Receiving on the LCD or
when you hear ‘chirps’ through the handset of
an extension telephone connected to another
telephone wall socket, just replace the
handset and your machine will receive the
fax.
To Next Page
Loading...
