Brother MFC-9450CDN - Memory security

Chapter 4
26
Turning setting lock on 4
a Press Menu, 1, 9, 2.
Security
2.Setting Lock
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning setting lock off 4
a Press Menu, 1, 9, 2.
Security
2.Setting Lock
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.
Memory security 4
Memory Security lets you prevent
unauthorized access to the machine.
While Memory Security is on, the following
operations are available:
 Receiving faxes into memory (limited by
memory capacity)
 Fax Forwarding (if Fax Forwarding was
already on)
 Remote Retrieval (if Fax Storage was
already on)
While Memory Security is on, the following
operations are NOT available:
 Printing received faxes
 Sending faxes
 Copying
 PC printing
 Scanning
 PC Fax Receive
Note
• To print the faxes in memory, turn off
Memory Security.
• You must turn off PC Fax Receive before
you can turn on Memory Security.
(See Turning off remote fax
options on page 59.)