Brother MFC-9450CDN - Delayed Polling; Sequential Polling

Chapter 10
64
Delayed polling 10
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 8.
Setup Receive
8.Polling RX
c Press a or b to choose Timer.
Press OK.
d Enter the time (in 24-hour format) you
want to begin polling.
Press OK.
For example, enter 21:45 for 9:45 PM.
e Enter the fax number you are polling.
Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling 10
Sequential polling lets you request
documents from several fax machines in one
operation.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 8.
Setup Receive
8.Polling RX
c Press a or b to choose Standard,
Secure or Timer.
Press OK.
d Choose one of the options below.
 If you choose Standard go to e.
 If you choose Secure, enter a four-
digit number, press OK, go to e.
 If you choose Timer, enter the time
(in 24-hours format) you want to
begin polling and press OK, go to e .
e Specify the destination fax machines
you want to poll by using One-Touch,
Speed-Dial, Search, a Group and or the
dial pad. You must press OK between
each location.
f Press Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
press Menu, 2, 6. (See Checking and
cancelling waiting jobs on page 37.)