Troubleshooting and routine maintenance
143
C
d Release the grey lock lever (1) that is on
the left side of the machine. Lift the front
of the drum unit and pull the drum unit
completely out of the machine using the
green handles on the drum unit.
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front
cover of the machine, DO NOT touch the
shaded parts shown in the illustration.
CAUTION
Make sure that you use the drum unit
handles when carrying it. DO NOT hold the
sides of the drum unit.
We recommend that you place the drum
unit on a flat surface protected by a piece of
disposable paper or cloth in case of toner
scatter or spillage.
1
To Next Page
Loading...
