Brother MFC-9840CDW - Printing the Network Configuration List

Control panel setup
105
6
Printing the Network Configuration List 6
Note
Node name: Node name appears in the Network Configuration List. The default node name is
“BRNxxxxxx” for a wired network or “BRWxxxxxx” for a wireless network (where “xxxxxx” is the last six
digits of the Ethernet address) (up to 15 characters).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a Press Menu.
b Press a or b to choose Print Reports.
Press OK.
c Press a or b to choose Network Config.
Press OK.
d (For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.