Brother MFC-9840CDW - Using the Brother Automatic Installer Application on the CD-ROM to Configure Your Machine for a Wireless Network

Configuring your machine for a wireless network
29
3
h If the following message appears, press a or b to choose On, then press OK. The wired network interface
will become inactive with this setting.
72.WLAN
WLAN Enable?
a On
b Off
Select ab or OK
i The wireless network connection status using the SecureEasySetup™ software will be displayed;
Connecting WLAN, Connected or Connection NG (for USA) / Connection error (for UK).
Connecting WLAN is displayed when the print server is trying to make connections to your router or
access point. Wait till either Connected or Connection NG (for USA) / Connection error (for UK)
is displayed.
Connected is displayed when the print server is successfully connected to your router or access point.
You can now use your machine in a wireless network.
Connection NG (for USA) or Connection error (for UK) is displayed when the print server has not
successfully connected to your router or access point. Try starting from b again. If the same message
is displayed again, reset the print server back to the default factory settings and try again.
Using the Brother automatic installer application on the CD-ROM to configure
your machine for a wireless network 3
See Wireless configuration for Windows
®
on page 33 and Wireless Configuration for Macintosh
®
on page 58
for information on how to use the Brother automatic installer application on the CD-ROM we have provided
with the machine.