Brother MFC-9840CDW - Configuration with an Access Point that Supports Secureeasysetup; For Mac os X 10.2.4 or Greater

Wireless Configuration for Macintosh
®
67
5
Configuration with an access point that supports
SecureEasySetup™ 5
For Mac OS
®
X 10.2.4 or greater 5
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
a Turn on the machine by plugging in the power cord.
b Press Menu, 7, 2, 6. Using a or b, choose On and press OK.
72.WLAN
6.WLAN Enable
a On
b Off
Select ab or OK
c Turn on your Macintosh
®
.
d Put the supplied CD-ROM into your CD-ROM drive.
e Double-click the Utilities icon and then Wireless Device Setup Wizard.