Brother MFC-9970CDW - Page 146

Troubleshooting
109
B
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait for the machine to cool
down before you touch the internal parts of
the machine.
c Pull the green tabs (2) at the left and
right hand sides toward you and fold
down the fuser cover (1).
Note
If the envelope levers (3) inside the back
cover are pulled down to the envelope
position, lift these levers to the original
position before pulling the green tabs (2)
down.
d Using both hands, gently pull the
jammed paper out of the fuser unit.
1
2
2
3
3