Brother MFC-9970CDW - Tray Use in Print Mode

Chapter 2
20
Tray Use in print mode 2
You can change the default tray the machine
will use for printing from your computer.
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Tray Setting.
Press Tray Setting.
d Press a or b to display
Tray Use:Print.
Press Tray Use:Print.
e Press Tray#1 Only, Tray#2 Only
1
,
MP Only, MP>T1>T2
1
or T1>T2
1
>MP.
1
The Tray#2 Only or T2 appears only if the
optional tray is installed.
f Press Stop/Exit.