Brother MFC-9970CDW - Beeper Volume; Speaker Volume

Chapter 1
2
Beeper volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Volume.
Press Volume.
d Press Beeper.
e Press Low, Med, High or Off.
f Press Stop/Exit.
Speaker volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Volume.
Press Volume.
d Press Speaker.
e Press Low, Med, High or Off.
f Press Stop/Exit.
You can also temporarily adjust the speaker
volume by pressing Hook.
a Press Hook on the control panel.
b Press d or c on the Touchscreen to
display Volume.
c Press Volume.
d Press to decrease or to
increase the speaker volume level.
Each button press changes the volume
to the next setting.
e Press Hook on the control panel.