Brother MFC-J435W User Manual

Chapter 2
16
Paper settings 2
Paper Type 2
To get the best print quality, set the machine
for the type of paper you are using.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Type.
Press OK.
d Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
e Press Stop/Exit.
Note
The machine ejects the paper with the
printed surface face up onto the paper tray
at the front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size 2
You can use six sizes of paper for copies:
Letter, Legal, A4, A5, Executive and
4"  6" (10  15 cm) and three sizes for
printing faxes: Letter, Legal and A4. When
you change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Size.
Press OK.
d Press a or b to choose Letter, Legal,
A4, A5, EXE or 4"x6".
Press OK.
e Press Stop/Exit.

Brother MFC-J435W Specifications

General

Print Technology	Inkjet
Max Scan Resolution	1200 x 2400 dpi
Fax Modem Speed	14.4 Kbps
Paper Input Capacity	100 sheets
Automatic Document Feeder	Yes, 20 sheets
Duplex Printing	Manual
Output Paper Capacity	50 sheets
Memory	64 MB
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	33 ppm
Scanner Type	Flatbed
Copy Speed (Color)	20 cpm
Connectivity	Wireless 802.11b/g
Display	1.9" LCD
Mobile Printing	Brother iPrint&Scan