Brother MFC-J435W User Manual

74
Dial Tone B
Setting the dial tone to Detection will shorten
the dial detect pause.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Dial Tone.
Press OK.
d Press a or b to choose Detection or
No Detection.
Press OK.
e Press Stop/Exit.
Telephone line
interference / VoIP B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you change the modem speed to minimize
errors in fax operations.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose
Compatibility.
Press OK.
d Press a or b to choose Normal or
Basic(for VoIP).
Press OK.
 Basic(for VoIP) reduces the
modem speed to 9,600 bps and
turns off color fax receiving and
ECM, except for color fax sending.
Unless interference is a recurring
problem on your telephone line, you
may prefer to use it only when
needed.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
Basic(for VoIP).
 Normal sets the modem speed at
14,400 bps.
e Press Stop/Exit.
Note
VoIP (Voice over IP) is a type of phone
system that uses an internet connection,
rather than a traditional phone line.

Brother MFC-J435W Specifications

General

Print Technology	Inkjet
Max Scan Resolution	1200 x 2400 dpi
Fax Modem Speed	14.4 Kbps
Paper Input Capacity	100 sheets
Automatic Document Feeder	Yes, 20 sheets
Duplex Printing	Manual
Output Paper Capacity	50 sheets
Memory	64 MB
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	33 ppm
Scanner Type	Flatbed
Copy Speed (Color)	20 cpm
Connectivity	Wireless 802.11b/g
Display	1.9" LCD
Mobile Printing	Brother iPrint&Scan