21
3
3
How to load
documents
3
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF 3
The ADF can hold up to 15 pages
1
and feeds
each sheet individually. Use 24 lb (90 g/m
2
)
paper and always fan the pages before
placing them in the ADF.
1
The ADF can hold up to 20 pages, if you stagger the
pages and meet the following conditions:
Temperature: 68 - 78.8 F (20 - 26 C)
Humidity: 40 - 50% without condensation
Paper: Using either BP60MPLTR or XEROX4200
20 lb paper
Document Sizes and Weights 3
How to load documents 3
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or correction
fluid are completely dry.
a Unfold the ADF Document Support (1)
and the ADF Document Support
Flap (2).
DO NOT use the ADF Document Support
Flap for Legal size paper.
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your document.
Stagger the pages of your document
and place it face down, top edge first
in the ADF underneath the guides, until
the screen shows ADF Ready and you
feel it touch the feed rollers.
Loading documents 3
Length: 5.8 to 14 in.
(148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Weight: 17 to 24 lb
(64 to 90 g/m
2
)
2
1
1
To Next Page
Loading...
Need help?
General
