Brother MFC-J435W User Manual

44
8
How to copy 8
The following steps show the basic copy
operation.
a When you want to make a copy, press
(COPY).
 Make sure you are in COPY mode.
 The LCD shows:
1 No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is FAX mode. You can
change the amount of time that the
machine stays in COPY mode after the
last copy operation.
(uuAdvanced User’s Guide: Mode Timer)
b Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF uu page 21.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
uu page 22.)
c If you want more than one copy, enter
the number (up to 99).
d Press Black Start or Color Start.
Stop copying 8
To stop copying, press Stop/Exit.
Making copies 8
1

Brother MFC-J435W Specifications

General

Print Technology	Inkjet
Max Scan Resolution	1200 x 2400 dpi
Fax Modem Speed	14.4 Kbps
Paper Input Capacity	100 sheets
Automatic Document Feeder	Yes, 20 sheets
Duplex Printing	Manual
Output Paper Capacity	50 sheets
Memory	64 MB
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	33 ppm
Scanner Type	Flatbed
Copy Speed (Color)	20 cpm
Connectivity	Wireless 802.11b/g
Display	1.9" LCD
Mobile Printing	Brother iPrint&Scan