Brother MFC-J6920DW - Setting the Date and Time

Routine maintenance
105
A
NOTE
f Press .
Setting the date and
time
A
The Touchscreen displays the date and time.
If it is not current, follow these instructions to
re-enter it.
You can add the date and time to each fax
you send by setting your Station ID.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Press Date & Time.
f Press Date.
g Enter the last two digits of the year on
the Touchscreen, and then press OK.
h Enter the two digits for the month on the
Touchscreen, and then press OK.
i Enter the two digits for the day on the
Touchscreen, and then press OK.
j Press Time.
k Enter the time (in 24-hour format) using
the keyboard on the Touchscreen.
Press OK.
(For example, enter 19:45 for 7:45 PM.)
l Press .
i
When the print
alignment is not
adjusted correctly,
text looks blurry
like this.
After the print
alignment is
adjusted correctly,
text looks like this.