Dialling and storing numbers
73
8
Fax Redial 8
If you are sending a fax automatically and the
line is busy, the machine will redial up to three
times at five minute intervals.
Redial only works if you dialled from the
machine.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
c Press Redial.
d Press Fax Start.
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• Redial will change to Pause when you
enter a fax number.
Additional Dialling
Operations
8
Outgoing Call history 8
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
Address Book, or delete from the history.
a Press (Fax).
b Press (Call History).
c Press Outgoing Call.
d Press the number you want.
e Do one of the following:
To send a fax, press Apply.
Press Fax Start.
If you want to store the number,
press Edit and then press
Add to Address Book.
(See Advanced User’s Guide:
Storing Address Book numbers from
the Outgoing Call history.)
If you want to delete the number from
the Outgoing Call history list, press
Edit and then press Delete.
Press Yes to confirm.
Press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
