Chapter 5
56
Receive Mode settings 5
Ring Delay 5
Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Operation from external and extension
telephones on page 69 and Fax Detect
on page 57.)
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Ring Delay.
h Press Ring Delay.
i Swipe up or down, or press a or b to
display the options, and then press the
number of times the machine will ring
before it answers.
If you choose 0, the machine will answer
immediately and the line will not ring at
all.
j Press .
F/T Ring Time
(Fax/Tel mode only) 5
When somebody calls your machine, you and
your caller will hear the normal telephone
ring. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it. However, if it is a voice call then the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T
Ring, it means that you have a voice caller on
the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring. However, you can still answer
the call on any telephone by using a remote
code.
(For more information, see Using remote
codes on page 70.)
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display F/T Ring Time.
h Press F/T Ring Time.
i Press how long the machine will ring to
alert you that you have a voice call (20,
30, 40 or 70 seconds).
j Press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
