Chapter 3
46
d Place your documents face up, short
edge first in the ADF until you feel them
touch the feed rollers.
The Touchscreen will display
ADF Ready.
When using ADF High Speed
Mode in Copy and Scan mode
Make sure your document size is A4
or Letter.
Place your documents face up, long
edge first in the ADF until you feel
them touch the feed rollers.
The Touchscreen will display
ADF Ready.
ADF High Speed Mode is available with
Copy and Scan mode. For more
information about ADF High Speed Mode,
see the following:
•(Copy)
ADF High Speed Mode copying
on page 80
• (Scan)
ADF High Speed Mode scanning
on page 96
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to fax, copy or
scan single pages or pages of a book.
Document Sizes Supported 3
How to load documents 3
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
Length: Up to 431.8 mm
Width: Up to 297 mm
Weight: Up to 2 kg