Chapter 9
80
Tray Select 9
You can change the tray temporarily for the
next copy. To change the default tray setting,
see Tray use in Copy mode on page 39.
a Load your document.
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Tray Select.
f Press Tray Select.
g Press Tray #1, Tray #2 or
Auto Tray Select.
h If you do not want to change additional
settings, press OK.
i Press Mono Start or Colour Start.
ADF High Speed Mode
copying 9
When copying multi-page A4 or Letter size
documents, you can print multiple copies
faster by placing the documents face up,
long edge first in the ADF. (See Using the
ADF on page 45.)
a Place your document face up, long side
edge first in the ADF.
b Press (Copy).
c Press the Options.
d Swipe up or down, or press a or b to
display ADF High Speed Mode.
e Press ADF High Speed Mode.
f Press On (or Off).
g Read the information on the
Touchscreen, and then confirm it by
pressing OK.
h If you do not want to change more
settings, press OK.
Change Paper Size to A4 or Letter to
match the paper size of your document.
i Press Mono Start or Colour Start.
The machine scans the document and
starts printing.
Enlarge/Reduce, Page Layout,
Auto Deskew and
Advanced Settings are not available
with ADF High Speed Mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
