Sending a fax
49
4
c You can change the following
fax-sending settings. Press Options.
Swipe up or down, or press a or b to
scroll through the fax settings. When the
setting you want is displayed, press it
and choose your new option. When you
are finished changing the options, press
OK.
(Basic User’s Guide)
For details about changing the following
fax-sending settings, see pages 50 to
52.
Glass Scan Size
Colour Fax Transmission
Preview Outgoing Fax
Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(See Advanced User’s Guide: Sending
a fax.)
Contrast
Fax Resolution
Set New Defaults
Factory Reset
2-sided Fax
Faxing at the end of a call
Broadcasting
Real Time Transmission
Overseas Mode
Delayed Fax
Batch Transmission
Cancelling Waiting Jobs
Polled Transmit
d Enter the fax number.
Using the dial pad
Using (Address Book)
Address Book
Using (Call History)
Outgoing Call
Caller ID history
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 51.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See Software and Network User’s
Guide.)
e Press Fax Start.
Faxing from the ADF 4
The machine starts scanning the
document to be sent.
Faxing from the scanner glass 4
If you choose Mono in the
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
If you choose Colour in the
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Yes (Colour fax) to confirm.
The machine starts dialling and
sending the document.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
