V - 15 - 1
(2) Change the detecting conditions (e.g., insert paper through the document sensors or the
registration sensor(s), open the front cover, remove the toner cartridge, jam paper at the paper
outlet, insert paper manually through the paper slot, and load the paper cassette(s)), and then
check that the indication on the LCD changes according to the sensor states.
(3) To stop this operation and return the machine to the initial stage of the maintenance mode,
press the Stop key.
NOTE: If you have opened and closed the front cover during the above procedure, you need to
open and close the front cover again upon completion of the procedure.
To Next Page
Loading...
