Home > Routine Maintenance > Maintenance
Maintenance
Always remove the batteries and disconnect the AC Adapter before cleaning the Label Printer.
>> Clean the Unit
>> Clean the Print Head
>> Clean the Tape Cutter
Clean the Unit
1. Wipe any dust and marks from the Label Printer using a soft, dry cloth.
2. Use a slightly dampened cloth on difficult to remove marks.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform or damage the
case of your Label Printer.
Clean the Print Head
Streaks or poor quality characters on printed labels generally indicate that the Print Head is dirty.
Clean the Print Head using a cotton swab or the optional Print Head Cleaning Cassette (TZe-CL4).
- Do not touch the Print Head directly with your bare hands.
- Read and follow the instructions provided with the Print Head Cleaning Cassette.
Clean the Tape Cutter
Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade, which may
result in the tape jamming in the cutter.
103
To Next Page
Loading...
Need help?
General
