Brother P-touch PT-D410 User Manual

Home > Set Up Your Label Printer > Connect the AC Adapter
Connect the AC Adapter
If connecting a power adapter, use only the AC Adapter, part number AD-E001A, specifically designed for this
Label Printer.
1. Insert the AC Adapter cord into the AC Adapter Socket on the side of the Label Printer.
2. Insert the plug into the nearest standard electrical socket.
Related Information
• Set Up Your Label Printer
14

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries