Brother P-touch PT-D410 User Manual

Home > Edit a Label > Add a New Block of Text to Your Label
Add a New Block of Text to Your Label
>> PT-D410
>> PT-D460BT
PT-D410
To print labels with multiple, but separate, sections of text, you can insert up to five different text blocks within the
same label.
To add a new block of either text or blank lines to the right of your current text, press and hold , and then
press simultaneously.
The cursor moves to the start of the new block.
- To change the character attributes for a block of text, follow the steps for changing character attributes
for a line of text.
- There is a maximum of five blocks per label.
PT-D460BT
To print labels with multiple, but separate, sections of text, you can insert up to five different text blocks within the
same label.
To add a new block of either text or blank lines to the right of your current text, press and hold , and then
press simultaneously.
The cursor moves to the start of the new block.
35

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries