Brother P-touch PT-D410 User Manual

Home > Print Labels > Print Labels > Sequential Printing
Sequential Printing
Use this function to create labels with sequentially arranged numbers or letters, from a single label format.
>> PT-D410
>> PT-D460BT
PT-D410
1. Press
and .
2. Press a or b to display [Numbering], and then press OK.
3. Press d or c to select the start point, and then press OK.
4. Press d or c to select the end point, and then press OK.
5. Press a or b to select the number of labels you want to print, and then press
or OK.
PT-D460BT
1. Press and .
2. Press a or b to display [Number], and then press OK.
3. Press d or c to select the start point, and then press OK.
4. Press d or c to select the end point, and then press OK.
5. Press a or b to select the number of labels you want to print, and then press
or OK.
Related Information
• Print Labels
85

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries