Brother P-touch PT-D410 User Manual

Home > Install Software > Connect the Label Printer to a Computer > Connect the Label Printer to a
Computer Using a USB Cable
Connect the Label Printer to a Computer Using a USB Cable
1. Make sure the Label Printer is turned off before connecting the USB cable.
2. Connect the USB cable to the USB Port on the Label Printer, and then to your computer.
3. Turn the Label Printer on.
Related Information
• Connect the Label Printer to a Computer
30

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries