Brother P-touch PT-D410 User Manual

Home > Print Labels > Select a Cut Option > Tape Cutting Options
Tape Cutting Options
In the Options table, these visual patterns represent parts of your label, as illustrated in the Example column.
ABC
Print area
Margin
Laminate margin
Setting Description Example
Small
Margin
A margin of 23 mm is printed first, and then
each label is printed, leaving a margin of 2 mm
before and after the text.
• When the label length is approximately 23 mm or
more
ABC ABC
1
2
2 2 2
1. Approximately 23 mm
2. 2 mm
• When the label length is approximately 23 mm or
less
A A
2
2 11
1. Approximately 23 mm
2. 2 mm
Large
Margin
The total margin (laminate margin + label
margin) is 25 mm either side of the label.
ABC ABC
2
2
2
2
1
1 1
1
1. Approximately 23 mm
2. 2 mm
Chain
• Select this setting when printing several
labels with minimum margins.
• Feed the tape before using the Tape Cutter,
otherwise part of the text may get cut off. Do
not try to pull the tape as this may damage
the Tape Cassette.
• A margin of 23 mm is printed first, and then
each label is printed, leaving a margin of 2
mm before and after the text.
ABC ABC
2 2
2
3
1
1. Approximately 23 mm
2. 2 mm
3. Cut Position
88

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries