Brother P-touch PT-D410 User Manual

11. Backspace
Press to delete any character to the left of the cursor.
12. Cursor
Press to move the cursor in the direction of the arrow.
13. OK
Press to select the displayed option.
14. Escape
Press to cancel the current operation.
15. Enter
Press to confirm your selection.
16. Accent
Press to select and insert an accented character.
17. Barcode
Press to create a barcode label.
18. Space
Press to insert a blank space.
Press to return to the default value.
19. Caps
Press to use upper-case letters only.
20. Shift
Press and hold when pressing a letter or number key to type an upper-case letter or the symbol marked on
the number key.
To move the cursor to the beginning of the previous or next block, press Shift and the a or b key
simultaneously.
To move the cursor to the beginning or end of the current line, press Shift and the d or c key simultaneously.
Related Information
• Set Up Your Label Printer
13

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries