To Next Page
W
Wendy MeyerAug 31, 2025
How to feed the label on my Brother QL-800?
- Iisabel02Aug 31, 2025
To feed the label on your Brother Label Maker, press the Feed ( ) Button for one second.
How to feed the label on my Brother QL-800?
To feed the label on your Brother Label Maker, press the Feed ( ) Button for one second.
How to fix white vertical line appears when printed in red on my Brother QL-800?
To fix a white vertical line appearing when printing in red on your Brother Label Maker: 1. Remove the DK Roll from the printer. 2. Close the DK Roll Compartment Cover completely. 3. Press and hold the Editor Lite Button for more than five seconds. Wait while the platen roller rotates. 4. When the platen roller stops rotating, load the DK Roll.
What to do if my Brother Label Maker prints labels with streaks or poor quality characters?
If your Brother Label Maker is printing labels with streaks or poor quality characters, or if the label is not fed correctly, the print head or roller might be dirty. Clean the roller.
How to fix poor print quality on my Brother QL-800?
If the print quality is poor on your Brother Label Maker, it might be due to dirt or lint on the roller preventing it from rolling freely. Clean the roller using the cleaning sheet available separately.
Why is my Brother QL-800 Label Maker not printing?
If your Brother Label Maker isn't printing or you're getting a printing error, first ensure the cable is securely connected. Next, verify the DK Roll is installed correctly; if not, remove and reinstall it. Also, check if there's enough roll remaining and that the DK Roll Compartment Cover is fully closed. If connected via a USB hub, try connecting the printer directly to your computer or a different USB port. Finally, if a print or transmission error has occurred, try turning the printer off and then on again. If issues persist, consider contacting your Brother dealer.
How to fix cutter error on Brother QL-800 Label Maker?
If a cutter error occurs with your Brother Label Maker: * Keep the DK Roll Compartment Cover closed and press the Power ( ) Button. * After the printer is Off, check the label outlet and remove any jammed labels.
Why is my Brother Label Maker not printing or showing a printing error?
If your Brother Label Maker isn't printing or you're seeing an error, there are several things to check: * Make sure the cable is securely connected. * Verify the DK Roll is installed correctly; remove and reinstall if needed. * Ensure there's enough roll remaining. * Confirm the DK Roll Compartment Cover is closed. * If a print or transmission error occurred, turn the printer off and on again. * If connected via a USB hub, try connecting directly to the computer or another USB port.
Why is the P-touch Add-In icon not displayed in Microsoft® Word for my Brother QL-800?
General| Color | Yes |
|---|---|
| Text alignment | Right, Center, Left |
| Printing colors | Black, Red |
| Print technology | Direct thermal |
| Maximum resolution | 300 x 600 DPI |
| Maximum print height | 58 mm |
| Minimum print length | 1000 mm |
| Maximum printing width | 60.96 mm |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Ethernet LAN | No |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired |
| PC connection | USB 2.0 |
| Sustainability certificates | ENERGY STAR |
| Display | - |
| Product color | Black, Grey |
| Housing material | Plastic |
| Cables included | USB |
| Bundled software | P-touch Editor Lite P-touch Editor 5 P-touch Address Book |
| Cartridges quantity | 2 pc(s) |
| Tape type | DK |
| Flash memory | 6 MB |
| Number of fonts | 5 |
| Number of styles | 8 |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, Data Matrix, EAN128, EAN13, EAN8, GS1-128, ISBN-2, ISBN-5, ITF-25, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E |
| Page description languages | Raster_P |
| AC input voltage | 220 - 240 V |
| Package depth | 184 mm |
| Package width | 264 mm |
| Package height | 232 mm |
| Package weight | 2090 g |
| Label memory | 99 label(s) |
| Number of frames | 126 |
| Languages support | CHI (SIMPL), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, JPN, NOR, POL, POR, RUS, SWE, TUR |
| Number of languages | 18 |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 213 mm |
|---|---|
| Width | 125 mm |
| Height | 142 mm |
| Weight | 1150 g |
Instructions for launching the P-touch Editor software for Windows and Mac.
Guidance on creating and printing labels using P-touch Editor in Express and Professional modes.
Procedure to reset printer settings to factory defaults using the printer's physical buttons.
How to reset printer settings to factory defaults using the computer's Printer Setting Tool.
Solutions for common printing issues such as no print or poor quality.
Detailed problem-solving guide with solutions for various printer errors.
