Brunswick Sync - HD Video Distribution Center

Sync Pre-Installation 47
HD VIDEO DISTRIBUTION CENTER
Electrical Information
VOLTS HERTZ AC/DC PHASE
AMPS
PER UNIT
WATTS
BRANCH
CIRCUIT
CUSTOMER
RESPONSIBILITY
100-130 50/60 AC 1
.5 PER
MODULATOR
60 PER
MODULATOR
2 WIRES +
GROUND
-
200-240 50/60 AC 1
.25 PER
MODULATOR
60 PER
MODULATOR
2 WIRES +
GROUND
-
NOTE:TheVideoDistributionCentercanacceptavarietyofsignalsourcessuchassatellite
boxes,cableset-topboxes,orDVD/Blu-rayplayers.Theaudioandvideofromeach
sourceisconnectedtoamodulatorthat“assigns”aunique“TV”channeltothe
source.Thenumberofmodulatorspresentinthesystemisdeterminedbythenumber
ofvideosourcestothatwillbeavailablefordisplayonthemonitors.Whenchoosing
modulators,itisimportanttoconsidertheconnectionsavailableonthesignalsource,
theoutputqualityofthemodulator(StandardorHighDenition),andfutureneeds.
There can be any number of different channels and modulators in the HD video distribution center. The
quantity and type of modulator is determined by the customer.
INSTALLATION INFORMATION
NOTE:Allvideosourcesmusthaveacomponentoutput.
NOTE: TheHDvideodistributioncentermustbewithin3-4ft(.9-1.2m)ofthecomponent
videosource.