BTX ECM630 - Generator Specifications and Maintenance; ECM 630 Generator Specifications

28
Publicaon 5423-020-REV 1.0 • www.btxonline.com
Generator Specifications
ECM 630
Exponenal Decay Wave Pulse Ranges
Voltage Range
LV Mode 5 to 500 in 1 V steps
HV Mode 505 to 3000 in 5 V steps
Voltage Accuracy
LV Mode 5%
HV Mode 5%
Time Constant Range
LV Mode 1 ms to 5.158 s
HV Mode 0.5 ms to 133.875 ms
Mulple Pulsing
1 to 2 per sample depending on
device’s current amplitude limit
Pulse Interval 5 to 30 s
Capacitance in µF
LV Mode 25 to 3275 μF in 25 μF steps
HV Mode 10, 25, 35, 50, 60, 75, 85 μF
Available Internal Resistance Selecons
LV Mode 25 to 1575 Ω in 25 Ω steps
HV Mode 50 to 1575 Ω in 25 Ω steps
Sample Resistance (Load)
LV Mode
PL ≤100 ms, load ≥8 to 9 Ω
PL >100 ms, load ≥ 100 Ω
HV Mode Load ≥40 Ω
Other Specicaons
Charging Time LV <7 s, HV <4 s
Monitoring
Pulse Voltage, Width, Droop %
and Sample Resistance
Display 7.0-in color display
Controls Touch Screen
Programmability Storage over 1000 Protocols
Arc Control Yes
Other Specicaons
Interlock Switches Yes
Pre-Pulse Sample
resistance check
Yes
Pulse Over Current
Protecon
Yes
PC control Yes
PC communicaons Yes
Log Report Yes
Remote Operaon Yes
Foot Switch Control Yes
Power Rangs 35 W idle and 350 W pulsing
Input Voltage rangs 100 to 240 VAC
Dimensions (H x W x D)
inches
12.75 x 11.25 x 8.5
Weight ~16 lb
Warranty 2 years
Operang Temperature 4°C to 40°C (40°F to 104°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
Operang Humidity 20% to 80% RH, non-condensing
Storage Humidity 20% to 80% RH, non-condensing
Mode of Operaon Connuous
Classicaon Class I
Polluon IP2X
Installaon Category II
Supplier Name BTX
Supplier Address
84 October Hill Rd.
Holliston, MA 01746
Supplier Phone Number 508-893-8999
Regulatory Cercaons
CE, ETL (UL, CSA), FCC, WEEE, EU
RoHS & CB Scheme