Buderus Logamatic 2107 User Manual

BFU remote control
8
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 43
Automatic mode
In addition to the green LED over the "AUT" key, the LED over the "Day mode"
or "Night mode" key also lights up, depending on which heating mode is
currently selected.
If there are two heating zones present, but only one of these is equipped with a
remote control, the LEDs on the controls apply to the heating zone without
remote control.
Normal heating mode and setback heating mode automatically switch at the
switching times set in the selected program.
Manual mode
Normal heating mode (day mode)
Switch to manual mode in order to change the desired temperature.
Normal heating mode (day mode) is indicated by the green LED over the "day
mode" key.
In this operating mode, the system is heated to the set day-time room
temperature, regardless of which heating program is set.
The heating program has no effect.
Party function
You are having a party and want the rooms to be heated for longer.
Press the "AUT" key to start automatic mode.
x
Press the "Day mode" key to start normal heating mode (day mode).
z
Press the "day mode" key.
After the party, press "AUT" to return to automatic mode.
z
x

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems