Buderus Logamatic 2107 User Manual

BFU remote control
8
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications.44
Manual mode
Setback heating mode (night mode)
Switch to manual mode in order to change the desired temperature.
The mode is indicated by the green LED above the "night mode" key.
In this operating mode, the system runs in setback heating mode (night mode),
regardless of which heating program is set.
If both heating zones are in setback heating mode (night mode), the DHW
heating is also switched off.
The heating program has no effect.
Pause function
You are about to leave your home for a few hours and would like to reduce the
heat while you are away.
Summer mode
In Summer mode, no heating takes place, but the water continues to be heated.
Press the "night mode" key.
On your return, press the "AUT" key.
1
x
The LED beside this symbol lights up.
Press the "Day mode" key, if you want to heat at short notice in summer mode.
Press the "Night mode" key, if you want to interrupt summer mode. The controls
will then remain constantly in Winter mode.
z
1

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems