2003 Buell P3: Chassis 2-3
HOME
Rear brake reservoir mounting screw 12-15
in-lbs
1.4-1.7 Nm Page 2-35
Rear drive sprocket bolts 18-22 ft-lbs 24-30 Nm
Apply several drops of LOCTITE 272 to last few
threads. Page 2-12
Rear fender mounting screws 30-36
in-lbs
3-4 Nm Page 2-62
Rear isolator-to engine crankcase 32-34 ft-lbs 46-50 Nm
Apply several drops of LOCTITE 243 to last few
threads, Page 2-72
Rear master cylinder mounting
screws
48-72
in-lbs
5-8 Nm
Apply several drops of LOCTITE 243 to last few
threads, metric, Page 2-35
Rear muffler strap bolts 22-25 ft lbs 30-34 Nm Page 2-58
Rear shock top and bottom bolt 35-40 ft-lbs 47-54 Nm Page 2-41
Steering head upper triple tree clamp
screws (at sliders)
13-16 ft-lbs 18-22 Nm LOCTITE ANTI-SEIZE, Page 2-53
Swingarm bolt 24-26 ft-lbs 33-35 Nm Apply anti-seize to bolt and install, Page 2-56
Swingarm pinch bolt 17-19 ft-lbs 23-26 Nm
Apply several drops of LOCTITE 243 to last few
threads, Page 2-56
Switchgear housing screws, right side 12-17
in-lbs
1-2 Nm Metric, Page 2-42
Valve stem nut 42-44
in-lbs
4.7-5.0 Nm Page 2-20
Windscreen screws 9-11
in-lbs
1-1.2 Nm Page 2-66
ITEM TORQUE NOTES
To Next Page
Loading...
