1110 - 65
DIGITAL INDUSTRIAL CONTROLLER
english
Sub-menus of the main menu option
OPTIONS
Language
Language definition
• German
• English
• French
Serial
This menu point only appears if the RS 232, RS 485/Profibus cards are installed
(see Operating Instructions for the RS 232, RS 485 / Profibus serial interface cards).
BinIn
Definition of the binary input’s function
none
not in operation
Alarm
Alarm relay 1 is switched via the binary input.
man/auto
Changeover between MANUAL and AUTOMATIC takes place via
the binary input.
Safety
The safety value is output through the binary input. (The controller
switches to MANUAL mode.) The manipulated variable cannot be
adjusted in this mode.
ext/intW
Via the binary input, switching between the external set-point (set-
point which is given as an electrical signal via the 2nd
input) and the internal set-point (set point pre-defined via the unit
keyboard) is possible. This menu point is only available in the
“external set-point” controller structure.
Line of action
inv: no
non-inverted line of action
inv: yes
inverted line of action
To Next Page
Loading...
Need help?
General
