1110 - 5
DIGITAL INDUSTRIAL CONTROLLER
english
Unauthorized operation of the individual operator control levels can be rendered
impossible by a free choice of user codes. Regardless of this, a permanently
programmed and invariable master code exists which allows access to all levels.
This 4-digit master code can be found on the bottom margin of this page. It
can be cut out and stored separately from the instruction manual.
Self-optimization algorithms (for self-adjustment and adaption) are implemented in
the controller and ensure automatic adaption of the controller’s parameters to the
process in the closed control loop.
Figure 1 shows an overview of the controller.
Figure 1: Overview diagram
Mastercode for digital
industrial controller:
8575
✂
To Next Page
Loading...
