Burkert 8693 - INTERFACES OF THE POSITIONER FOR THE MODELS WITH CABLE GLAND

26
Electrical installation
11.3.1 Input signals from the control center (e.g.
PLC)
Terminal Assignment
6 Digital input +
7
Set-pointvalueGND
8 Set-pointvalue+
13 Notassigned
14 DigitalinputGND
Tab. 7: Terminal assignment; input signals of the control center
11.3.2 Output signals to the control center (e.g.
PLC)
Terminal Assignment
1
AnalogpositionfeedbackGND
2 Analogpositionfeedback+
3 DigitaloutputGND
4 Digital output 2
5 Digital output 1
Tab. 8: Terminal assignment; output signals to the control center
11.3.3 Process actual value input (for Type 8693
only)
Input type* Terminal Assignment Switch **
4...20mA
-internally
supplied
9
GND(identicaltoGND
operatingvoltage)
Switch
below
10
BridgeafterGND(GND
from3-conductor
transmitter)
11
Outputfromtransmitter
12 +24Vtransmitterpower
supply
4...20mA
-externally
supplied
9
Notassigned
Switch
above
10
Processactual-
11 Process actual +
12
Notassigned
Frequency
-internally
supplied
9
Clockinput–(GND)
Switch
below
10
Notassigned
11 Clockinput+
12 +24 V sensor power supply
Frequency
-externally
supplied
9
Clockinput–
Switch
above
10
Notassigned
11 Clockinput+
12 Notassigned
english
Type 8692, 8693 REV.2