UNPACKING THE 161
8
U
CAUTION
Heavy device
The device is very heavy and may cause injury if it falls.
►
The device should only be unpacked and set up by individuals who are
experienced in handling heavy loads.
►
Allow a second person to help you during unpacking and set-up if need be.
►
Pay attention to any possible sharp edges.
Unpacking the 161
1. Place the box on the floor and carefully remove the device and its accessories
2. Place the device on a stable, level surface.
3. Protect the device from heat and humidity.
4. Connect the device as described in the following chapters.
What’s in the box?
The following items are supplied:
• 161 All-in-One mounted on stand
• 2 screw-on antennas for Wi-Fi reception
• Power cord
• Remote control
• Special tool
• 2 XLR-RCA adapters
• Operating instructions: Owner’s Manual for the 161, Instructions for Operation via
the iPad® App, Instructions for Operation via a Web browser
Set-up
Carefully remove the device from the transportation packaging and place it in a
suitable location. When selecting a location for set-up, ensure sufficient ventilation and
avoid direct sunlight, dust, and humidity to protect the device from overheating.
Make sure that the set-up location is stable enough to support the weight of the device.
Slots and openings on the device serve as a means of ventilation. They must not be
covered by magazines, tablecloths, curtains, etc.
When operating the device in extremely warm environments, additional ventilation
must also be ensured. Avoid operating the device in extremely humid environments,
for example in a bathroom.
The IR receiver receives the signals from the remote control and should not be covered
by objects.
To Next Page
Loading...
