EasyManua.ls Logo

BUSCH R5 - User Manual

BUSCH R5
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Get technical data,
instruction manuals,
service kits
Instruction Manual
R5
Oil-Lubricated Rotary Vane Vacuum Pumps
RA 0760 A PLUS
0870211676/-0004_en / Original instructions / Modifications reserved 10/02/2021
Ateliers Busch S.A.
Zone industrielle, 2906 Chevenez
Switzerland

Table of Contents

Other manuals for BUSCH R5

Preview: Instructions
Instructions52 pages

Questions and Answers

  • E
    Eric PadillaAug 25, 2025
    Why does BUSCH R5 Water Pump have abnormal oil consumption?
    • C
      christopher02Aug 25, 2025
      Abnormal oil consumption in your BUSCH Water Pump can occur due to oil leaks, in which case you should replace the seals. It may also be caused by a float valve that isn't working properly; in this case, check the float valve and the oil return line, repairing it if necessary. Finally, if the machine runs at atmospheric pressure for a long period, make sure that the machine operates under vacuum.
  • M
    Matthew MillsAug 25, 2025
    Why is the oil emulsified in my BUSCH R5?
    • L
      Lauren JonesAug 25, 2025
      If the oil in your BUSCH Water Pump is emulsified, it's likely that the machine sucked in liquids or significant amounts of vapor. In this case, flush the machine (contact Busch).
  • H
    Heather AllenSep 1, 2025
    What does inlet pressure warning mean on my BUSCH Water Pump?
    • H
      Heather TaylorSep 1, 2025
      An inlet pressure warning or alarm on your BUSCH Water Pump indicates that the inlet pressure is too high, or the machine has operated for too long at a high inlet pressure. Reduce the inlet pressure and limit the operating time at a high inlet pressure.
  • T
    thompsonmarioSep 1, 2025
    What to do if my BUSCH Water Pump does not reach the target pressure?
    • E
      Elizabeth BrownSep 1, 2025
      If your BUSCH Water Pump isn't reaching the target pressure in pressure control mode, it might be over or undersized for the application, or there could be leaks or pressure drops in the pipework upstream of the suction connection. Check the system pipework.
  • D
    David BarrySep 2, 2025
    What causes the exhaust gas pressure warning on my BUSCH R5 Water Pump?
    • J
      Jennifer AustinSep 2, 2025
      An exhaust gas pressure warning or alarm indicates that the exhaust gas pressure in the oil separator is too high. Replace the exhaust filters.
  • D
    Daniel LewisSep 2, 2025
    What does differential pressure high warning mean on BUSCH Water Pump?
    • A
      Alexander DiazSep 2, 2025
      A high differential pressure warning on your BUSCH Water Pump (if the inlet filter condition monitoring kit is installed) indicates that the inlet filter cartridge is clogged by dust or particles. Replace the inlet filter cartridge.
  • T
    tammykellySep 3, 2025
    How to fix communication problems with my BUSCH Water Pump remote control?
    • N
      Nicholas Davis MDSep 3, 2025
      If you're experiencing communication problems when remotely controlling your BUSCH Water Pump, check the wiring between the machine and the network to ensure there are no broken wires or loose connections. Also, verify the remote control parameters.
  • A
    Amanda RoseSep 3, 2025
    What does oil level alarm mean on my BUSCH Water Pump?
    • T
      Tara LoganSep 3, 2025
      An oil level alarm on your BUSCH Water Pump indicates that the oil level is too low. Top up the oil.
  • D
    desiree49Sep 3, 2025
    What does exhaust gas temperature warning mean on my BUSCH R5 Water Pump?
    • R
      rachelchenSep 3, 2025
      If you receive an exhaust gas temperature warning or alarm on your BUSCH Water Pump, it means the exhaust gas temperature is too high. Please refer to the troubleshooting steps for the problem 'The machine runs too hot'.
  • R
    Rebekah OwenSep 4, 2025
    Why can't I control my BUSCH R5 via the User Interface?
    • D
      Danielle SantiagoSep 4, 2025
      If your BUSCH Water Pump cannot be controlled via the User Interface, the machine might be in Automatic or Remote control mode. Switch the control to Local / Manual mode.

Summary

Safety

Product Description

Standard Features

User Interface Functions

Installation

Installation Conditions

Specifies environmental and spatial requirements for proper installation.

Connecting Lines and Pipes

Electrical Connection

Details on safe and correct electrical hook-up for the machine.

Commissioning

Prerequisites Before Use

Configuration

Start Up

In Operation

Control Mode

How to select and manage operating modes like Local, Remote, Manual, Auto.

Operating Mode

Details on Speed Control and Pressure Control operating modes.

Monitoring

Dysfunction and Alarms

Information on warning and alarm signals and their causes.

Stop the Machine

Maintenance

Maintenance Schedule

Recommended maintenance tasks and intervals for normal/harsh use.

Oil and Oil Filter Change

Overhaul

Troubleshooting

Troubleshooting Guide

Provides solutions for common problems and error messages.

Technical Data

BUSCH R5 Specifications

General IconGeneral
BrandBUSCH
ModelR5
CategoryWater Pump
LanguageEnglish

Related product manuals