● Before installing the spare wheel, install the spare wheel cover cushion support
plate and the spare wheel base cushion support plate in place; otherwise, there may
be an abnormal noise from the spare wheel cover.
● Do not touch the camera during the installation of the deflated tire to avoid its
damage;
● Tighten the fixing nuts of the deflated tire with the jack rocker assembly.
2. Push the spare wheel cover toward the front of the car to fully fit the spare wheel cover
with the spare wheel base.
3. Tighten the fixing screws between the spare tire cover and the camera and install the
camera cover.
Block the wheel
1. Place a stopper before the tire in
the diagonal direction of the
deflated tire, to prevent the car from
slipping.
■ Place the stopper in front of the
front wheel or behind the rear of the
rear wheel to block it.
Loosen the wheel nuts
2. Remove the trim covers of the
wheel nuts with the wheel nut
remover in the attaching tools;
3. Loosen all wheel nuts of the
deflated tire;
■ Loosen the wheel nuts before
jacking the car.
To Next Page
Loading...
