BYD SEAL EV - Page 148

outlet mode being those when the A/C
was turned o󽗈 last.
Air amount regulation
Tap the suitable blower speed level
button to set the blower speed at a
desired level. A higher blower speed level
indicates a higher air volume.
Defrost button for front windshield
• Press this button on A/C control panel
or tap “Front” on the screen to
distribute air to the front windshield
and side windows. Press this button
again or tap “Front” on the screen;
the A/C will return to the status used
last time.
•
Press this button on A/C control panel
or tap “Front” on the screen to
activate the defrosting and demisting
function and no matter whether the
compressor control button is operated
or not, the A/C will also be turned on.
Temperature regulation
• Driver A/C temperature adjustment
•In the individual mode: Temperature
regulation on the driver’s seat.
•In the relative mode: Temperature
regulation on the driver and front
passenger seat.
•To increase/decrease the
temperature, tap the upper/lower
arrow on the screen, or touch the
temperature display area and then
swipe downwards/upwards.
• Front passenger A/C temperature
adjustment
•In the individual mode: For the
front passenger seat temperature
regulation.
•In the relative mode: This mode is
for setting temperature for the front
passenger's space, and then quitting
the linkage mode and entering the
independent mode.
•To increase/decrease the
temperature, tap the upper/lower
arrow on the screen, or touch the
temperature display area and then
swipe downwards/upwards.
•“lo"/"HI" will be displayed when
the temperature is set to the lowest/
highest value.
Independent control button
• Tap this button to switch from
individual mode to relative mode.
•Individual Mode: The temperature
of the driver’s side and front
passenger’s side can be set
seperately. When the individual
mode is selected, the button icon
illuminates.
•
Relative Mode: Adjust the driver
side and front passenger side set
temperature at the same time by the
driver side temperature adjustment
button. In the relative mode, the
press icon is grey.
• When the front passenger's space
temperature set button is operated
in relative mode, the A/C system
will automatically switch to individual
mode.
Max. cooling button
Tap this button to activate the Max
Cooling control. The compressor is then
started, the temperature is lo, the air
amount is adjusted as Max, the internal
circulation is started, and air blows in face
level mode. Tap this button again, A/C
turns into auto mode.
A/C button (cooling/heating button)
Tap the button (cooling/heating) to start
A/C, then the icon lights up and the
compressor starts working to cool or
heat. Tap this button again to deactivate
the function, the icon disappears and the
compressor stops working.
Internal/External circulation
147
05
IN-VEHICLE DEVICES