• Ensure that the seat belt passes
through the guide tting without
kinking and is not bent over the edge
of the guide tting.
Always follow the instructions below
when using a child restraint on a rear
seat:
• When installing the child restraint
system on the rear outboard seats, if
there is no front passenger, the front
passenger seat can be adjusted to
make sure there is enough space for
both the front seat and rear child seats.
• The head support can be adjusted
or even removed to ensure that the
vehicle seatback can safely support the
child restraint system.
•
When a child restraint is without
seatback, never remove the head
restraint from the vehicle and adjust it
to locking position.
• When the top tether is used on a
second-row outboard seat, route it at
the outside of each head support rod.
• When the child restraint installed on a
rear outboard seat is with top tether,
remove the cargo cover to have access
to the top tether anchorage. Store the
cover safely in your vehicle.
• For more installation instructions,
please read the instructions provided
with your child restraint system.
Installing Child Restraint Systems:
① Driver seat
② Front passenger seat
③ Rear left seat
④ Rear center seat
⑤ Rear right seat
ISOFIX or i-Size CRS installing options
in the vehicle:
Seats
1
2
3
b)
4
b)
5
b)
Front
passenger
airbag
activated
a)
Front
passenger
airbag
deactivate
d
a)
Seating
position
suitable for
universal
belted
(Yes/No)
×
Yes
Forward-
facing only
Yes Yes Yes Yes
28
To Next Page
Loading...
