EasyManua.ls Logo

BYD TANG 2024 - Charge Preheating; Charge Port Anti-Theft Lock

BYD TANG 2024
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMINDER
When the vehicle is stored for
a long time, the smart charging
function may be activated, which
is normal and not a vehicle failure.
Power for smart charging comes
from the high-voltage battery
pack, so it is normal that an
SOC decrease is noticed when the
vehicle is powered on.
To avoid high-voltage battery
over-discharging due to smart
charging, when the vehicle is in
low SOC, smart charging is not
available. Avoid parking in low
SOC for a long time, and charge
the vehicle in time.
Charge Preheating
High-voltage battery preheating is
designed to shorten the DC charging time
in low temperatures.
How to Use
Go to infotainment touchscreen
EnergyCharging and Discharging.
The charge preheating screen is
displayed.
Enable or disable battery preheating in
this screen.
REMINDER
This function is disabled by
factory default.
This function turns o󽗈
automatically when battery
temperature reaches appropriate
range and needs to be turned on
next time.
REMINDER
Charge preheating cannot be used
during charging.
Charge Port Anti-theft
Lock
In order to prevent the charging
connector from being stolen, the
vehicle charge port is anti-theft during
charging and discharging. This function
is deactivated by default. Go to
infotainment touchscreen
Energy
Charging and Discharging to activate
or deactivate charging port anti-theft
lock.
When the function is enabled, unlock
the vehicle and unplug the charging
connector during charging in the
following ways:
Press the unlock button on the smart
key to unlock.
Press the microswitch next to the
exterior handle of the driver's side
door to unlock.
Press the central unlock button on
the driver's side door to unlock.
CAUTION
The connector needs to be pulled
out within 30 seconds after it is
102

Table of Contents

Related product manuals